NEW!! HIGHLIGHTS



 
Harmony Central 121st AES 2006 Coverage
San Francisco, California: October 5 - 8
121st AES Home | Videos | User Picks | Complete Coverage
Guitar/Bass | Keys, Synth, Samplers / DJ | Software | Recording / Live Sound | Drums & Perc
PRESS RELEASE

Radial Engineering Introduces The JX44 Air Control

October 13, 2006

(Click for a close-up)
 
Additional Images
(Click for a close-up)

Radial Engineering displayed a prototype of the new JX 44 Air Control at the 121st AES Convention in San Francisco.

The Radial JX44 Air Control is a rack-mount device designed to provide quick and easy control over guitars, effects pedals and amplifiers on a live stage. The four input channels are capable to handle wireless systems, electric guitars and acoustics. Like the Radial JD7 Injector, the JX44 is 100% discreet, class-A, transformer isolated and equipped with Drag Control™ to ensure the natural tone of the instrument is maintained. It is equipped with two different effects routing options, built in Radial direct box, full re-amping capabilities and can be remotely controlled for stage use.

Feature set
Front panel is designed to be clear of controls and cables to ensure quick and efficient manipulation during a live performance. Therefore most controls are recessed for 'set & forget' by the stage tech and to prevent accidental use during a hectic show. A central 'system monitor' panel brings together all primary function status indicators for quick status review. Guitar selector inputs are 'exclusive' whereby selecting one input channel automatically disengages the previous active input. Amplifier outputs are 'inclusive' to allow as many amps as desired to be on at any one time.

Inputs
Normally, the guitar inputs located on the rear panel would be used. Switching jacks on the front panel are provided for added flexibility and are paralleled to the rear panel jacks. Inserting a jack into the front panel will reroute the signal to this input. Inputs A and B are equipped with Drag control for hardwired guitars while inputs C and D are equipped with a trim control to balance the signal coming from wireless or acoustic guitars. The panic button would be used in case a wireless system malfunctions. It 'hardwires' input A to amp output 1 to ensure the show goes on. Guitar inputs may be controlled with the optional JR5 footswitch.

Outputs
There are four output channels. Outputs 1 and 2 are regular mono while outputs 3 and 4 are set up for stereo amp rigs. All outputs are transformer isolated to eliminate hum & buzz and equipped with 180° polarity reverse and 'iso' ground lift. A separate JR5 remote control may be used to turn the amps on. This is also equipped with a mute function for quiet tuning. A separate tuner output is located on the rear panel. The JX44 can be muted from the front panel switch, from either JR5 remote locations or by using a standard contact closing 'guitar amp style' foot switch.

Advertisement

Direct Box & Reamp
A built in transformer isolated Radial direct box combines two handy features: it allows a 'clean' performance to be recorded should the artist intend to release a live recording. Clean tracks are much easier to fix (replace or slide notes) in post production. Full reamping is also provided for to allow the artist to replace tracks or thicken the sound later on. Should an acoustic guitar be required, input-D can be routed directly and exclusively to the DI for a direct mixing channel feed. Pre or post effects routing is also provided for in addition to ground lift and 180° polarity reverse.

Effects routing
The radial JX44 is equipped with two effects loops: one is a buffered 1/4" guitar-level send & return for local connection to a multi-effects processor or local external effects bay. The other is a proprietary balanced system intended for long runs that mates with an optional Radial SGI set. This allows front-stage pedal boards to be used without introducing noise or signal loss due to cables.

The JR5 remote is equipped with two XLR outputs, one at left and the other at right to accommodate various pedalboard setups. Any standard mic cable can be used to connect the remote to the JX44. The system comes complete with external power supply and cable lock to accommodate all international electrical requirements and safety regulations.

Radial anticipates doing a short pre-production run in October or November and be in full-swing production by January for the 2007 concert season.

Target price:
Radial JX44 Air Control $1000 US List
Radial JR5 remote control $175 US List each
Radial SGI set $250 US

For more information, visit their web site at www.radialeng.com.

27 readers say this product rates (out of 5):
4.04
Vote on this product!
Based on the article, what do you think of this product? (1-boring 5-cool) 1 2 3 4 5   
User Comments

Post New Message

Recent Radial Engineering Headlines

  • Radial Engineering: 1200 Floor Monitors, 1500 Floor Monitors (Jan 17, 2008)
  • Radial Engineering: New Products At NAMM (Jan 16, 2008)
  • Radial Engineering: Gefell UM930 Multi-Pattern Dual-Element Studio Microphone (Jan 22, 2007)
  • Radial Engineering: Forest Audio Launches With the Q6 Counter Coil Equalizer (Jan 22, 2007)
  • Radial Engineering: Tailbone 15V Convertor for Tonebone Pedals (Jan 22, 2007)
  • Radial Engineering: Tonebone PZ-Pre Acoustic Instrument Preamplifier (Jan 22, 2007)
  • Radial Engineering: 8ox Rackmount Mic Splitter (Jan 22, 2007)
  • Radial Engineering: SW8 Auto Switcher (Jan 22, 2007)
  • Radial Engineering: JX44 Air Control (Jan 22, 2007)
  • Radial Engineering: The Phazer Phase-Alignment Tool (Jan 22, 2007)

    All Radial Engineering Headlines

    Similar Headlines

  • Radial Engineering Introduces The JX44 Air Control (Oct 13, 2006)
  • Radial Engineering Showcases The JX44 Air Control (Jan 22, 2007)
  • Alesis Introduces The io|Control FireWire Interface and Control Surface (Jan 24, 2007)
  • Behringer Releases B-Control Fader BCF2000-WH Control Surface (Sep 25, 2007)
  • Mackie Control Provides Hands-On Control for Popular DAW Software (Jul 15, 2002)
  • Mackie Introduces C4 Commander Control Software For Control C4 (Jan 26, 2006)
  • Get Mackie Control, Logic Control, and HUI Power in One Controller (Aug 12, 2003)
  • B-Control Edit Software for Behringer's Control Surfaces (Nov 03, 2004)
  • Control|24 Control Surface for Pro Tools (Jan 18, 2001)
  • "Gain Control" Digidesign Control Surface Bundles Announced (Aug 05, 2004)
  • About Us   Submit News   Media Kit
    Harmony Central®
    Email: webmaster@harmony-central.com
    Copyright © 1995-2005 Harmony Central, Inc. All rights reserved. Privacy Statement